Products Details

Current Location : HomePage > Products

Coatings

Transfer foil is constructed of a lot of different special coating layers.

While WASHIN manufacture our foil by self-developed materials, most foil manufacture get materials from other manufactures and stuff for products.

Develop coating materials and manufacture original foil with them, and develop new one again.

That iterative process gives us new chance to extend our technology.

WASHIN has a big advantage in that we have an exploitation technology of special coating with full knowledge of converting.

WASHIN COAT, a coating material for converting, attends to every need of foil development with a huge variety of product for each layer.

Further more, we apply our technology of coating material for foil to a fuctional film to meet market needs more and more.

The converting world is segmentalized and upgraded in the future.

In such situation, WASHIN COAT proposes useful products and technology to the converting market.

This catalog show only product lineup of WASHIN COAT.

If you have any question about detailed product information, please feel free to contact us.



WASHIN COAT TFH Series : Coating material for transfer foil


It is developed for in-molding foil which is used for the molding system of simultaneous transcription.
We assort a set of product required in release layer, UV hard coat layer, various middle layers, and sizing layer.
Every product is able to select and combine according to your requirements.


Use

Type

Product name

Feature

Solid content

Release layer
(one layer)

two-pack

TF - 1001

good adherability to film

10.0%

CAT - 1

75.0%

one-pack

TF - 1101

gas cushion

0.6%

one-pack

TF - 1201

light release type

5.0%

one-pack

TF - 1202

good solvent resistance

10.0%

Release layer
(two layer-1)

one-pack

TF - 1101

gas cushion

0.6%

one-pack

TF - 1102

good surface slippery

2.5%

one-pack

TF - 1103

overstampability

3.1%

Release layer
(two layer-2)

one-pack

TF - 1201

light release type

5.0%

one-pack

TF - 1202

good solvent resistance

10.0%

one-pack

TF - 1203

better definition
than TF - 1202

14.3%

Protective
and
coloring layer


two-pack

TFH - 2001

foil for plastic / for coloring

47.0%

CAT - 2

97.0%


two-pack

TFH - 2002

foil for paper / for coloring

50.0%

CAT - 2

97.0%

Corrosion prevention layer

one-pack

TF - 4001

corrosion prevention
for tin metalizing

5.0%

Sizing layer

one-pack

TFH - 5001

for styrene substrates
(ABS / AS / PS)

28.0%

one-pack

TFH - 5002

36.0%

one-pack

TFH - 5003

36.0%

one-pack

TFH - 5004

for PET / UV thermal
hardening varnish

20.0%

one-pack

TFH - 5005

for PMMA / PC / second surface foil

34.0%

one-pack

TFH - 5006

for PP substrates

14.0%

one-pack

TFH - 5007

11.0%

one-pack

TFH - 5008

for general plastic

16.0%

one-pack

TFH - 5009

for multi-color printing foils

19.0%

one-pack

TFH - 5010

for UV / thermal hardening varnish

31.0%

one-pack

TFH - 5011

for PE / PVC substrates

14.0%

one-pack

TFH - 5012

for PET / substrates

22.0%

two-pack

TFH - 5013 - 1

for laminated PP / general coated paper

45.0%

TFH - 5013 - 2

18.0%



WASHIN COAT TFM Series : Coating material for special transfer foil


It is developed for in-molding foil which is used for the molding system of simultaneous transcription.
We assort a set of product required in release layer, UV hard coat layer, various middle layers, and sizing layer,
Every product is able to select and combine according to your requirements.


Use

Type

Product name

Feature

Solid content

Release layer (one layer)

two-pack

TF - 1001

film adhesion type

10.0%

CAT - 1

75.0%

one-pack

TF - 1102

good surface slipping property

2.5%

UV hard coat layer

two-pack

TFM - 2101

heat-precure / post UV cure type

53.0%

CAT - 3

0.5%

one-pack

TFM - 2102

heat-precure / post UV cure type

33.0%

First primer layer

two-pack

TFM - 3101 A


Improvement of adherability to hard coat layer
< yellowing type>

40.0%

TFM - 3101 B

37.0%


two-pack

TFM - 3102 A

Improvement of adherability to hard coat layer

40.0%

TFM - 3102 B

33.0%


two-pack

TFM - 3103 A


Improvement of adherability to hard coat lager
One coat application
*with printability

40.0%

TFM - 3103 B

35.0%

Second primer layer

one-pack

TFM - 3201

Good Printability

29.0%

Primer layer for metalization

two-pack

TFM - 3101 A

yellowing type

40.0%

TFM - 3101 B

37.0%

two-pack

TFM - 4101 A

yellowing type

35.0%

TFM - 4101 B

34.0%

two-pack

TFM - 4102 A

non-yellowing type

40.0%

TFM - 4102 B

25.0%

Anchoring layer on metalization

one-pack

(TFM - 5101)

good adherability to metalization

30.0%

one-pack

(TFM - 5102)

chlorine - free type

20.0%

Sizing layer

one-pack

TFM - 5101

good adherability to substrates

30.0%

one-pack

TFM - 5102

chlorine - free type

20.0%

one-pack

TFM - 5103

chlorine - free type

32.0%



WASHIN COAT MP Series : Coating for special metalized PET Film


It is developed for metalized PET film for metalic yarn.
It is superior in adhesion to the surfece of PET film and that of metalization layer.
It is anabled to use for purpose other than metalic yarn, because it has properties to endure hard circumstances.

Example: launderability



Metal

Type

Product name

Feature

Solid content

Al

one-pack

MP - 6001

for coloring

45.0%

one-pack

MP - 6002

for coloring

46.0%

one-pack

MP - 6003

corrosion prevention of aluminium materialization layer

29.0%


two-pack

MP - 6004 A

for deep color

36.0%

MP - 6004 B

43.0%



three-pack

MP - 6005 A

for metallic yarn / post-staining resistance

36.0%

MP - 6005 B

43.0%

CAT - 5

30.0%


two-pack

MP - 6006 A

low-formaldehyde

55.0%

MP - 6006 B

34.0%

three-pack

MP - 6007 A

for metallic yarn / high pressure staining resistance

64.0%

MP - 6007 B

33.0%

MP - 6007 C

34.0%

additive

ADD - 1

add slippery

37.0%

additive

ADD - 2

add slippery

10.0%

Ag

one-pack

MP - 6101

transparent coat

25.0%

one-pack

MP - 6102 White

white coat

16.0%


two-pack

MP - 6103 A

transparent coat

40.0%

MP - 6103 B

30.0%

three-pack

MP - 6104 A

transparent coat

15.0%

MP - 6104 B

22.0%

CAT - 4

50.0%

three-pack

MP - 6105

white coat

31.0%

MP - 6105 White

25.0%

CAT - 5

30.0%



WASHIN COAT: UV Coatings for Cosmetic Containers


Polyster UV Top Coating

             Use

     Base  material

             Product name

            Feature

Finishing

AS / ABS

POLYSTER UV C-231 CLEAR

hard coat

POLYSTER UV C-252 CLEAR

good stampability

POLYSTER UV C-254 CLEAR

semi-hard for plastic

PET

POLYSTER UV C-352 CLEAR

semi-hard for PET

Frost fiishing

AS / ABS

POLYSTER UV F-256 MAT

frost finishing

PET

POLYSTER UV F-355 MAT

frost finishing

Special functionality

AS / ABS

POLYSTER UV C-721 CLEAR

anti-pollution

AS / ABS

POLYSTER UV C-733 CLEAR

anti-finger print


Polyster UV Under Coating

             Use

Base material

            Product name

           Feature

Basecoat
for coloring

-

POLYSTER L-100 CLEAR BASE

one-pack basecoat


Primer for

PP

POLYSTER L-140 PP primer

halogen - free

PET

POLYSTER L-130 PET primer

primer for PET


Polyster UV Coating for Metalization

        Use

Base material

            Product name

         Feature


Metalization

AS / ABS

POLYSTER UV C-872 CLEAR

topcoat for metalization

AS / ABS

POLYSTER UV C-891 UNDERCOAT

basecoat for metalization


Polyster Thinner

Use

Base material

Product name

Feature

Thinner
for dilution

-

POLYSTER UV No.25 Thinner

mild solvent type

POLYSTER UV No.33 Thinner

UV paint for PET

POLYSTER No.101 Thinner

dedicated / L-100 clear base

POLYSTER No.141 Thinner

dedicated / L-140 PP primer

POLYSTER No.131 Thinner

dedicated / L-130 PET primer


previous item: BELAY